OF GREENEDGE IBS WALL PANEL
Installing the GreenEdge wall panels
does not require special skills.
It is cost-efficient and quick – up to 90 m² per 8 hours
due to its standardized shape and light structure.
To install the panels,
just need to simply lift them to an upright position
and cemented together to the floor
and to the ceiling.
The installation of GreenEdge wall panels
is up to six times faster than
the use of traditional construction methods,
such as brickwork or laying block walls.
GreenEdge wall offers lower initial as well as long-term costs when compared with other materials due to low product costs, elimination of plaster, no curing, no zari-work for conduiting, no lintels, no stone sills, no maintenance, no flaking/cracks, increased carpet area as well as flexibility to move partition walls when required.
Lighter weight of the walls allows for lower dead weight thus reducing structural steel costs.
EASE OF INSTALLATION & EFFICIENCY
GreenEdge wall is factory made, transported to the site ready to install on pallets and manually erected on concrete floors. Highly versatile and fast to install, requiring just two regular construction workers to install up to 6m2 per hour and are pre-cured thus do not require any curing. Can be cut, sawn and dimenzioned as per requirement for installation at site.
Projects utilizing GreenEdge wall can save weeks or months over other materials due to no prep work, fast installation, no curing time requirement and time saving with plumbing, electrical and HVAC conduiting.
AESTHETICALLY & FUNCTIONALLY BENEFICIAL
On account of their factory finish they are aesthetically pleasing. Due to its availability in different heights and thicknesses with no load-bearing application it provides total design flexibility.
More carpet area due to lower thickness of 75mm and 100mm instead of brick partitions of 150 mm with plaster on both sides.
No lintels need to be cast as panels can be place horizontally as lintels where required.
Due to its consistent line, length and levels GREENEDGE walls do not require stone or wood sills/frames to level surfaces for windows and openings.
Hanging wash-basins, cup-boards, mirrors, paintings with regular plug screws possible and can take as much as 250 kg of load. Drilling, Nailing, Hammering as in any normal brick-plaster wall.
Good workability, Less mess in installation, no curing, minimum waste at site and quick installation contribute to better site management.
No problems like leaching of salts from bricks over time. No cracking, flaking of plaster due to one homogeneous material. No plastering means additional saving on time, quality, maintenance etc.
SUPERIOR STRENGTH & DURABILITY
Strength gradually increases over time with an cube compressive strength of 25 to 30N/mm2 and an sectional compressive strength of 20 to 30N/mm2.
GreenEdge walls do not deteriorate, experience creep and stress relaxation, lose strength and/or deflect over time.
SAFETY & WELL PROTECTION
Provides excellent protection against impacts from intrusion, slamming, explosions, vehicles and projectiles.
High fire ratings between 120 mins and 180 mins.
Good Sound insulation.
Have passed tornado/hurricane/heavy rain-sleet-hail impact testing in most of the countries with severe weather, giving owners an added level of safety assurance in areas prone to severe weather.
Because precast concrete products are typically produced in a controlled plant environment, they exhibit high quality and uniformity.
Problems affecting quality typically found on a job site - temperature, curing conditions, craftsmanship and material quality - are nearly eliminated in a plant environment.
No curing means massive water savings during construction.
Lower raw material used than with other partitions and all raw material composed of natural materials that are nontoxic and environmentally safe.
Given green building material status in Malaysia, Singapore and many other countries due to its very low energy used compared to other options.
EASY M & E INSTALLATION
GreenEdge walls have hollows of 44mm diameter in the 75mm wall and 68mm diameter in the 100mm wall to allow the passage of water pipes, electrical wiring, HVAC and hydraulic installations without making holes/chases.
EASY PAINTING, TILING & CLADDING
GreenEdge wall thanks to its quality finish, get a horizontal and vertical flatness, without any joint feel. Painting can be done directly or after applying a 2mm wall skim coat. Texture paint coat can be directly applied to external surfaces for decorative effect.
All Tiling and Cladding can be directly fixed using regular cement mortar or tile adhesive or equivalent.